Why we don't publish pricing
No two garage floors are the same. One might be clean, dry, and ready to coat. Another might have cracks, oil stains, old paint, or moisture problems hiding under the surface. Publishing a square-foot price would either be misleadingly low or unnecessarily high for most homeowners.
That's why Rhino Garage Floors gives every homeowner a free 5-point slab inspection. We measure the floor, inspect the concrete, and recommend the right system — then you get a real number that matches your actual job.
What affects your project price
Floor size and layout
Larger floors use more material, but small, cut-up garages can take more labor per square foot. The shape matters as much as the size.
Concrete condition
Cracks, spalling, oil saturation, and old peeling coatings all need repair before the new system goes down. The prep is where the real cost lives.
Moisture issues
High moisture vapor can delaminate a coating. If your slab needs a moisture-mitigation primer, that adds material and time — but it also saves the floor from failing.
The coating system
A 2-coat system with a standard top coat is different from a 3-coat system with UV-stable layers and anti-slip additives. More layers, more protection, more cost.
Add-ons
Cove base, control joint filler, wall coatings, and step coatings give a finished look but also extend the scope.
Access and scheduling
Tight driveways, remote locations, or weekend work can all affect the final number.
What's included in a professional proposal
A professional proposal should be specific. At a minimum, you want to see:
- Surface preparation method (diamond grinding is the standard)
- Crack and joint repair details
- Number of coats and material system
- UV stability, flake type, and anti-slip treatment
- Cleanup and protection of adjacent areas
- Walk-on and drive-on cure times
- Warranty terms in writing
If a bid is vague or leaves out prep, it's usually because the prep is being skipped.
The hidden cost of a cheap bid
The cheapest coating is almost never the best value. A low bid often means minimal grinding, no crack repair, thin or skipped coats, and a top coat that will yellow or peel within a year or two.
A failed floor has to be ground down and re-coated from scratch — sometimes at a higher cost than doing it right the first time. The price you pay is for the prep, materials, and warranty backing it all up.
How to get your exact number
The fastest way to know what your floor will cost is to schedule your free 5-point slab inspection. We'll come to your home, inspect the concrete, and give you a written proposal with the system, timeline, and warranty spelled out.
No pressure, no upsell — just a straight answer on what your garage needs to look like a showroom.